Tag Archives: Xrev Transmit

Xrev Transmit – Windows 8 Support

Posted on January 21, 2013 by Chris

Hello All, We’ve just uploaded 2 new builds for our version 1.3.6 & version 2.0.30 Xrev Transmit.  We now officially support Windows 8 on these versions and addressed some issues which may have been experienced in Windows 7 due to … Continue reading →

Posted in Bug Fixes, New Release | Tagged | Comments Off on Xrev Transmit – Windows 8 Support

Xrev Transmit – Aconex Integration

Posted on August 9, 2012 by Chris

With Xrev Transmit now integrating directly with the online collaboration software Aconex, we wanted to clarify some recent queries we’ve had regarding this functionality. Some users were concerned that they wouldn’t have the chance for the exports and prints to … Continue reading →

Posted in New Features, News | Tagged , , | Comments Off on Xrev Transmit – Aconex Integration

RTC Australasia 2012 – Great Success

Posted on May 29, 2012 by Chris

Recently we attended to the RTC Australasia 2012 held at the Novotel, Wollongong, NSW, Australia.  We had two speakers at the event as well as a stand to promote our current products and to provide a sneak peak to the … Continue reading →

Posted in News | Tagged , | 1 Comment

Xrev Transmit – Build 1.2.20

Posted on May 16, 2012 by Chris

We have recently been notified of an issue where Xrev commands would fail to run at all.  After some investigation we discovered it was cause by the Project Information parameter “Author” not existing in a project.  This parameter should always … Continue reading →

Posted in Bug Fixes, New Release | Tagged , | Comments Off on Xrev Transmit – Build 1.2.20

Xrev Transmit – 2013 release update

Posted on May 3, 2012 by Chris

It seems that our users are keen to update to Revit 2013, but won’t do so until Xrev Transmit supports it for fear of having to go back to the “old way” of issuing drawings. Once you’ve used it, you … Continue reading →

Posted in New Features, New Release | Tagged , | Comments Off on Xrev Transmit – 2013 release update

Xrev Transmit – Build 1.2.7

Posted on September 1, 2011 by Chris

This week we had two minor issues reported and we’ve quickly resolved. <ProjName> parameter was not correctly intepreting the Project Name from the project when using it in Naming Conventions/Output Paths. Xrev could fail on load if you had an … Continue reading →

Posted in Bug Fixes, New Release | Tagged , , | Comments Off on Xrev Transmit – Build 1.2.7

Xrev Transmit – Build 1.2.6

Posted on August 30, 2011 by Chris

This update resolves a minor issue where the “Issue Name” parameter is not available when doing an “Untracked Issue”. If you are aware of any other issues please let us know and we’ll attempt to find a resolution as soon … Continue reading →

Posted in Bug Fixes, New Release | Tagged , , | Comments Off on Xrev Transmit – Build 1.2.6

Xrev Transmit – Version 1.2.3

Posted on July 7, 2011 by Chris

You asked and we listened! New Features You can now use custom Project Information & Sheet Category parameters in your folder outputs and naming conventions. We have added the ability to include the Issue Reason in folder outputs and naming … Continue reading →

Posted in New Features, New Release | Tagged , , | Comments Off on Xrev Transmit – Version 1.2.3

Xrev Transmit – New Build (maintenance release)

Posted on June 17, 2011 by Chris

Today we identified an issue in Xrev Transmit when a user has multiple shared parameters of the same name applied to the sheet category within their project.  This caused an error within Xrev Transmit and it would fail to start. … Continue reading →

Posted in Bug Fixes, New Release | Tagged , , , | Comments Off on Xrev Transmit – New Build (maintenance release)

Xrev Transmit – End of Financial Year

Posted on June 5, 2011 by Chris

take advantage of the soaring Aussie dollar, introductory pricing, and tax benefits Continue reading →

Posted in Pricing, Promotion | Tagged , | Comments Off on Xrev Transmit – End of Financial Year