Category Archives: Bug Fixes

Xrev Transmit – 3.2.0

Posted on July 9, 2015 by Chris

For those paying attention, the other day we officially released version 3.2.0 of Xrev Transmit on our website. What’s new? If you’ve seen this error or similar when multiple people run Xrev Transmit: An unexpected error has occurred and the … Continue reading →

Posted in Bug Fixes, New Features | Tagged , , | Comments Off on Xrev Transmit – 3.2.0

Xrev Transmit – Windows 8 Support

Posted on January 21, 2013 by Chris

Hello All, We’ve just uploaded 2 new builds for our version 1.3.6 & version 2.0.30 Xrev Transmit.  We now officially support Windows 8 on these versions and addressed some issues which may have been experienced in Windows 7 due to … Continue reading →

Posted in Bug Fixes, New Release | Tagged | Comments Off on Xrev Transmit – Windows 8 Support

Xrev Transmit – Build 1.2.20

Posted on May 16, 2012 by Chris

We have recently been notified of an issue where Xrev commands would fail to run at all.  After some investigation we discovered it was cause by the Project Information parameter “Author” not existing in a project.  This parameter should always … Continue reading →

Posted in Bug Fixes, New Release | Tagged , | Comments Off on Xrev Transmit – Build 1.2.20

Xrev Transmit – Build 1.2.13 & Breaking News

Posted on November 25, 2011 by Chris

Earlier this week I was helping one of our customers customise their Xrev Transmit Document Transmittal template to match their office standards.  In doing so it required that I include some of the “content controls” or “merge fields” of the … Continue reading →

Posted in Bug Fixes, New Release | Comments Off on Xrev Transmit – Build 1.2.13 & Breaking News

Xrev Transmit – Build 1.2.12

Posted on October 25, 2011 by Chris

Unfortunately solving the last bug created an extra couple that needed to be resolved, if you experience the following, please update to build 1.2.12 or later: When creating multiple DWF/DWFx formats in a profile, adjusting radio buttons on one type … Continue reading →

Posted in Bug Fixes, New Release | Comments Off on Xrev Transmit – Build 1.2.12

Xrev Transmit – Build 1.2.11

Posted on October 19, 2011 by Chris

Monday 17/10/2011 we had an issue reported where a user was finding that their walls/columns weren’t showing up in their DWG export when using Xrev Transmit on Autodesk Revit 2011.  It took some testing but we were able to pinpoint … Continue reading →

Posted in Bug Fixes, New Release | Comments Off on Xrev Transmit – Build 1.2.11

Xrev Transmit – Build 1.2.10

Posted on October 6, 2011 by Chris

We’ve recently addressed a few minor issues: When adding Xrev Transmit – Issue command to the quick access toolbar there was no logo, “Issue Name” was not substituting when doing an “Untracked Issue” Added the “Issue Reason” to the summary … Continue reading →

Posted in Bug Fixes, New Release | Comments Off on Xrev Transmit – Build 1.2.10

Xrev Transmit – Build 1.2.7

Posted on September 1, 2011 by Chris

This week we had two minor issues reported and we’ve quickly resolved. <ProjName> parameter was not correctly intepreting the Project Name from the project when using it in Naming Conventions/Output Paths. Xrev could fail on load if you had an … Continue reading →

Posted in Bug Fixes, New Release | Tagged , , | Comments Off on Xrev Transmit – Build 1.2.7

Xrev Transmit – Build 1.2.6

Posted on August 30, 2011 by Chris

This update resolves a minor issue where the “Issue Name” parameter is not available when doing an “Untracked Issue”. If you are aware of any other issues please let us know and we’ll attempt to find a resolution as soon … Continue reading →

Posted in Bug Fixes, New Release | Tagged , , | Comments Off on Xrev Transmit – Build 1.2.6

Xrev Transmit – New Build (maintenance release)

Posted on June 17, 2011 by Chris

Today we identified an issue in Xrev Transmit when a user has multiple shared parameters of the same name applied to the sheet category within their project.  This caused an error within Xrev Transmit and it would fail to start. … Continue reading →

Posted in Bug Fixes, New Release | Tagged , , , | Comments Off on Xrev Transmit – New Build (maintenance release)